Cd-R/Cd-Rw Disc Operations; Other Information - Denon Professional DN-300CR Quick Start Manual

Hide thumbs Also See for DN-300CR:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

CD-R/CD-RW Disc Operations

Warning: Make sure that the power is not accidentally turned off while the finalize, un-finalize, or
disc/track erase operations are being executed. If this occurs, the data on the disc will be corrupted,
and it is also possible that the disc itself will become unusable.
See the User Guide for more details about the various operations that you can perform on a CD-
R/CD-RW disc, such as finalizing a recorded CD-R/CD-RW disc so that it can be played on a
conventional CD player, or erasing all or part of the tracks on a CD-RW disc.
Finalizing
Finalizing is the operation of writing the TOC (Table Of Contents, information about the recorded
data such as the number of songs and the playback start time of each song) to the CD-R/CD-RW
media.
A disc recorded on the DN-300CR cannot be played back on a conventional CD player until the final
TOC has been written to the disc. The DN-300CR itself will be able to play the disc even before it has
been finalized.
Normally, no additional recording can be done on CD-R/CD-RW media once it has been finalized.
However, in the case of a CD-RW, you can "un-finalize" the disc so that additional recording can be
performed.
1. Insert a recorded CD-R/CD-RW disc into the disc slot.
2. While stopped, press the Finalize button on the front panel or the remote control. The display
will indicate "FINALIZE".
If you decide to cancel the operation, press the Finalize button once again.
3. Press the Enter button. The display will indicate "YES?"
If you decide to cancel the operation, press the Menu button.
4. To execute the operation, press the Enter button once again. The display will briefly show
"Loading" and then finalization will begin. The display will indicate "Finalizing" while in
progress.
When finalization is finished, the display will indicate "Loading" and then return to the main
screen. All operating buttons are disabled while finalization is being performed.

Other Information

CDs
When playing audio CDs, note the following:
• DN-300CR can play Music CDs, CD-R, and CD-RW discs. The disc file system can be either
CD-DA (CD-Text) or CD-ROM (ISO9660).
• Do not play discs in non-circular shapes (heart-shaped discs, octagonal
discs, etc.; see image) or discs that have been repaired with adhesive or
tape. These can damage the unit.
• Depending on the software used to burn a CD (or other conditions), some CDs may not play
correctly.
10

Advertisement

Table of Contents
loading

Table of Contents