Advertisement
en
Trouble shooting
1.
Downside and upside of trim frame are not aligned
(Front view)
2.
The surface of trim frame is not aligned
F0313BH70CP.indd Sec1:23
F0313BH70CP.indd Sec1:23
(Side view)
• Cause and remedy
The base bracket assembly is not attached in
the centre. Remove the Trim Frame (downside)
and base bracket assembly, then install them
again. See page 12.
• Cause and remedy
Bracket (downside) is not installed in the correct
position. Remove the Bracket (downside) and
reinstall it according the "Attaching position
diagram". See page 16, (11-2).
• Cause and remedy
The support plates are not installed in correct
position. Remove the support plate and reinstall.
See page 13-14.
23
2016/4/26 9:09:25
2016/4/26 9:09:25
Advertisement
