SPX TIF3340 User Manual

FEATURES
•
Large backlit display shows any combination of
T1, T2, IR, T3, T4, T1-T2, T1-IR, T2-IR, T3-T4,
IR-T3, and IR-T4, plus MAX, MIN, and AVG.
•
Relative time clock on MAX, MIN, and AVG
provides a time reference for major events.
•
Electronic offset function allows compensation
for thermocouple errors.
•
Readout in °F, °C, or Kelvin (K).
•
Auto shutdown.
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
© 2009 SPX
Professional 4-channel
Thermocouple Thermometer
plus Infrared Thermometer
Infrared
THerMOMeTer
BUTTONS
= Power ON or OFF.
= Steps through maximum (MAX), minimum
(MIN), and average (AVG) readings. To exit
MAX / MIN / AVG mode, press this button for
three (3) seconds.
= Switch between Celsius (°C), Fahrenheit
(°F), and Kelvin (K) temperature units.
= Freeze and unfreeze display readings.
= Displays T1, T2, IR, T1-T2, T1-IR, and
T2-IR (differential temperature measure-
ment) in the primary, secondary, and tertiary
displays. Press button for two seconds to
show T3, T4, IR, T3-T4, IR-T3, and IR-T4.
Press button for two more seconds to exit.
= Press once to turn on backlight;
press again to turn off backlight.
Hold for three (3) seconds to access or
exit Setup menu.
= Scrolls to the setup option you want to
change; press again to increase the
displayed setting.
= Press once to record; press again to stop
recording. In Setup menu, scroll to the setup
option you want to change; press again to
decrease the displayed setting.
= Press once to enter a setup option;
press again to store the displayed setting
in memory.
TIF3340
Sheet 1