Advertisement
Installation Steps:
Two installation options:
1. Direct mounting to wall or vertical surface:
Turn power off. Bore three holes per
dimensions below around supply wires
Position luminaire on lower bolts, install top
bolt and tighten all three bolts. Apply silicone
sealant around supply wire and wall opening
Step 1
Step 3
ILP – Industrial Lighting Products, LLC
519 Codisco Way, Sanford, FL 32771
Phone: (407) 478 3759 Fax: (407) 478 3760
www.ilp-inc.com
INSTALLATION INSTRUCTIONS
Install the two lower screws/bolts
use wall anchors or self anchor bolts
Remove cover, feed supply wires through
clamp, connect wires to luminaire, restore
power to circuit and test proper operation
LED DUSK-TO-DAWN
November 5, 2014
Step 2
Step 4
Advertisement
