Sunfire OLE-2SF User Manual page 14

Local IR Input
The Local IR-RECEIVER IN is
typically used to connect an external
IR sensor to the touchpad. Typical
applications include a plasma-
friendly IR sensor placed near a TV,
or an auxiliary IR sensor placed in
an area more convenient than the
location of the touchpad. IR signals
that are received by the IR Input are
sent out both the Local IR-EMITTER
OUT and the System Port.
Connect IR-RECEIVER IN,
-GROUND and +1VOLTS OUT (if
required) as shown below. Consult
the instruction manual that came
with your external equipment
before making connections.
14
Note: In certain cases, the built-in
IR sensor on the Olé-SF can be
flooded with plasma TV interference
or other ambient light interference.
In this case, connect a plasma-
friendly IR sensor to the Local IR
Input and disable the built-in IR
sensor in SunTools.