Select Rs232 Port - UNAOHM AP 401 Full HD User Manual

12.1. Select RS232 Port

In order to establish a connection between the instrument and a PC, it is necessary to
indicate the RS232 or USB port on the PC to which the instrument is connected. In order to
Select RS232 Port
do so, click the icon, which opens the window shown in figure 2.
Instrument setup:
Figure 2: Select RS485 Port
This window contains a drop down menu which allows the user to select the port on the PC
OK
to which the instrument is connected. After having made the selection, click the button
to close the window.
AP401FULL-HD_rev.09_UK 51