UNAOHM AP 401 Full HD User Manual page 11

Viewing area
Resolution
Contrast Ratio
Brightness
Surface Treatment
Viewing Angle
Backlighting
Reception standards
Functions
Video polarity
Demodulators
Frequency subcarriers
De-emphasis
Modulation frequency
deviation
Loudspeaker
Output power
Auxiliary inputs and outputs
SCART connector
(complete)
HDMI
RS 232 serial e USB
ports
10
Display Characteristics
5.7 " (Diagonal).
320 (L) x 240 (H) pixels.
300:1
2
400 cd/m .
Anti-Reflection and Hard-coating (>2H).
±55 ° (L), -30/+60 ° (H).
LCD.
All colour PAL, SECAM and NTSC encodings.
The screen is capable of displaying:
1) Full screen TV picture.
2) Partial screen TV picture – analogue indication of the relative
level with luminous horizontal band and horizontal TV
synch. pulse waveform
3) Full frequency spectrum with two markers.
4) Partial frequency spectrum (SPAN) with two markers.
5) Video monitor (through SCART connector).
6) Menus and submenus.
Automatic positive or negative, based on the reception
standard (selectable in SAT band).
Audio characteristics
Selectable for TV - AM - FM modulated signals.
1) Automatically selected for the VHF/UHF frequency range
based on the TV standard.
2) Adjustable for the SAT frequency range, in increments of 10
kHz from 5 MHz to 9.77 MHz, by means of PLL frequency
synthesis.
Selectable in 4 steps (only for the SAT frequency range): flat -
J17- 50µS - 75 µS.
Selectable in 4 steps. (Only for the SAT frequency range):
narrow, medium, wide and extra wide, corresponding to
bandwidths from 140 to 400 kHz approx.
70 mm., Magnetodynamic
Continuously adjustable up to a maximum of 0.2 W.
Audio and video in/out (1V /75Ω - 0.3V/600 Ω) – RGB input.
RGB output for all functions shown on the LCD.
Digital audio and video output
for PC data exchange
AP401FULL- HD_rev. 09_UK