Advertisement
it's hip to be square!
Make good use of grease
during assembly. These
will help hold the eccentric
spacers when installing the
V-groove wheels and also
keep them from damaging
the side plates or end trucks
during adjustment. Likewise,
it will ensure smooth, quiet
operation when applied the
the Z-axis ACME threaded
rods.
re:3D Inc.®
BEFORE YOU BUILD
When assembling the
Gigabot®, it is essential to
work on a flat surface and to
carefully square perpendicular
parts as much as possible.
This is especially important
while assembling the side
plates, Z-axis uprights and
vertical common rails, bed
frame, upper and lower cross
rails, and bridge assembly.
Use large clamps to help
square up frames if needed.
the uses of grease
Viki 2.0 Installation
3
Advertisement
