Disposal Of Packaging Materials; Before Initial Use; Electrical Connection - Silvercrest SUR 46 C2 Operating Instructions Manual

Disposal of packaging materials

GB

Before initial use

■

Electrical connection

26
The packaging protects the appliance from damage during transport . The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable .
Returning the packaging to the material cycle conserves raw materials and reduces
the amount of waste generated . Dispose of packaging materials that are no
longer needed in accordance with applicable local regulations .
WARNING
► Packaging materials should not be used as a plaything . Risk of suffocation .
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment
in the event of a warranty claim .
Remove all packaging materials and all transport locks from the appliance .
To ensure safe and trouble-free operation of the appliance after making the
electrical connection, please observe the following advice:
DANGER
Danger due to ultrasonic waves!
► During the cleaning process, do not touch the inner surface of the stainless
steel bath or the cleaning fluid: ultrasonic waves can cause serious health
damage .
CAUTION
► Before connecting the appliance, compare the connection data (voltage
and frequency) on the rating plate with that of your mains power supply .
These data must agree so that no damage is sustained by the appliance .
► Ensure that the mains power cable is not damaged and is not running over
hot surfaces and/or sharp edges .
► Ensure that the mains power cable is not taut or knotted .
► Always remove the mains plug from the wall socket after each use .
SUR 46 C2