Technical Safety - Miele K 2601 Vi Operating And Installation Instructions

Table of Contents

Advertisement

Warning and Safety instructions

Technical safety

The coolant system is tested for leaks. This appliance complies
with statutory safety requirements and the appropriate EU
guidelines.
This refrigeration appliance contains the coolant Isobutane
(R600a), a natural gas which is environmentally friendly. The coolant
does not damage the ozone layer and does not contribute to the
greenhouse effect.
The use of this coolant has, however, led to a slight increase in the
noise level of the appliance. In addition to the noise of the com-
pressor, you might be able to hear the coolant flowing around the
cooling circuit. Unfortunately, this cannot be avoided, but it does not
affect the performance of the refrigeration appliance.
When transporting and installing the refrigeration appliance, ensure
that no parts of the cooling circuit are damaged. Splashes of coolant
can damage the eyes.
In the event of damage:
– Avoid naked flames or anything which creates a spark.
– Disconnect the refrigeration appliance from the mains electricity
supply.
– Ventilate the room where the refrigeration appliance is located for
several minutes.
– Contact the Miele Customer Service Department.
The more coolant there is in a refrigeration appliance, the larger
the room it should be installed in. In the event of a leakage, if the ap-
pliance is in a small room, there is the danger of combustible gases
building up. For every 11 g of coolant at least 1 m
required. The amount of coolant in the appliance is stated on the
data plate inside the appliance.
8
3
of room space is

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K 2911 viK 2611 viK 2811 viK 2801 viK 2901 vi

Table of Contents