Provide for good ventilation in the spraying area and Ÿ for sufficient fresh air in the complete room. Thank you very much for acquiring a STAYER product! Evaporating inflammable solvents create an explosive We congratulate you for having elected a STAYER Electric environment.
8 Air filter Connecting the Electrical Unit with the Spray 9 Spray gun Gun.(EPG300) 10 Suction tube with container seal 11 Container for spray material, 800 ml - Insert the spray gun 9 onto the electrical unit 1 until it can 12 Vent cover be heard to engage.
ENGLISH Preparation of material (fig.11) 4.1 Placement and testing (Fig.2-3) 1. Mix the material well before measuring viscosity. Observe the wind direction when operating the power tool outdoors. 2. Completely submerge the cup viscometers, in the material to be sprayed. –...
6.2 EU declaration of conformity Warranty card Included in the documentation that accompanies this The undersigned: STAYER IBERICA, S.A. equipment, you should find the warranty card. You should With address at: fill out the card completely and return to vendor with a copy...
Page 11
In all correspondence and spare parts order, please manufacturing and testing procedures, repair should always include the 10-digit article number given on the be carried out by an after-sales service centre for type plate of the machine. STAYER power tools.
Page 12
Área Empresarial Andalucía - Sector I Calle Sierra de Cazorla nº7 C.P: 28320 Pinto (Madrid) SPAIN Email: sales@grupostayer.com Email: info@grupostayer.com www.grupostayer.com...
Need help?
Do you have a question about the EPG300 and is the answer not in the manual?
Questions and answers