Advertisement
5. MAINTENANCE
WARNING! Disconnect the wrench from the air supply before changing accessories,
servicing or performing maintenance. Replace or repair damaged parts. Use genuine parts
only.
Unauthorised parts may be dangerous and will invalidate the warranty.
5.1.
If the air supply system does not have an oiler, lubricate the wrench daily with a few drops
of Sealey air tool oil dripped into the air inlet.
5.2.
Check and top up the gearbox oil by removing grub screw, marked OIL, located in the body.
5.3.
Clean the wrench after use.
5.4.
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. To rectify, check the air supply and follow instructions in Section 3.
b) Grit or gum deposits in the wrench will also reduce performance. If your model has an air
strainer (located in the air inlet), remove the strainer and clean it. Flush the wrench out
with gum solvent oil or an equal mixture of SAE 10 oil and paraffin. Allow to dry before
use.
5.5.
When not in use, disconnect from the air supply, clean and store in a safe, dry, childproof
location.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
SA5/S.V3 Issue:(4)SP-25/07/13
Advertisement
