Advertisement
CHOPPING
1.
Firstly place the drive shaft into the motor base, make sure it is
in position.
2.
Place the chopping jar on the Motor Base, lining up the arrow
on the chopping jar with the unlock symbol and turn clockwise
until the chopping jar locks into position. Make sure it is
assembled correctly, otherwise the appliance will not operate.
See Page 3 S
3.
Insert the Stainless steel blade onto the drive shaft in the
chopping jar securely. Make sure it is locked into position.
4.
Place the prepared food into the jar. The food must be cut into
small pieces. During chopping, you can add food through the
feeding funnel with the pusher, never use food or fingers to
push the food into the feeding funnel.
5.
Place the lid onto the jar and turn it clockwise until the tab of
the lid locks securely into the jar handle. Make sure it is locked
into position correctly, otherwise the appliance will not operate.
6.
Connect the appliance to power supply and set Speed Selector to
your desired speed.
7.
There are four setting: P, 0, 1, 2. The 1 setting is the low speed,
the 2 setting is the high speed. Turn the selector to P position
and hold it to pulse actuate motor for delicate chopping. Release
it to return the 0 position. The Pulse mode allows you to create
a burst of power for quick, efficient blending. You can chop up to
400g of following foodstuff. Hard substance: cheese, dried fruits,
and certain vegetables (carrots, celery), Soft substance: certain
vegetables (onions, spinach) Raw and cooked meat (boned and
sliced).
8.
Turn the Speed Selector to "0" position and unplug the appliance
after chopping. Open the top lid and hold the blade by its hub and
remove. Unlock the chopping jar by turning it in anti-clockwise
away from motor base, and lift it off. Empty the processed food.
WARNING: THE BLADE BASE CAN BE DISASSEMBLED FOR
CLEANING, THE BLADES ARE EXTREMELY SHARP. HANDLE
WITH CARE
KNEADING/MIXING
1.
Firstly place the drive shaft into the motor base, make sure it is in position.
2.
Place the chopping jar on the Motor Base from the unlock position and turn
clockwise until the chopping jar locks into position. Make sure it is assembled
correctly, otherwise the appliance will not operate.
3.
Insert the plastic blade onto the drive shaft in the jar securely.
4.
Place ingredients into the jar.
5.
Place the lid onto the chopping jar and turn it clockwise until the tab of the lid clicks
into slot in the jar handle. Make sure it is locked into position correctly, otherwise
the appliance will not operate.
6.
Insert the food pusher into the feeding funnel.
7.
Connect the appliance to the power supply.
8.
You can add ingredients through the feeding funnel while the appliance is running.
NOTE: the food pusher also can be used as measuring cup for measuring oil or water.
9.
During kneading/mixing, to avoid vibration, hold the lid with one hand, and with the
other hand hold the handle.
10. Stop the process by turning the speed selector to "0" position as soon as the
pastry starts to form a ball.
11. Unplug the appliance and remove the blade before removing the
dough.
BEATING AND WHISKING
1.
Firstly place the drive shaft onto the motor base, make sure it is in
position.
2.
Place the chopping jar onto the Motor Base from the unlock
position and turn clockwise until the chopping jar locks into position.
Make sure it is assembled correctly, otherwise the appliance will
not operate. See Page 3 S
3.
Insert the whisk onto the drive shaft securely.
4.
Place the ingredients into the bowl. You can use it to prepare
mayonnaise, sauces, egg whites, meringues (up to 10 egg whites),
and whip cream.
5.
Place the lid onto the chopping jar and turn it clockwise until the tab
of the lid clicks into slot in the jar handle. Make sure it is locked into
position correctly, otherwise the appliance will not operate.
6.
Set the speed selector to the high speed.
NOTE: Never use this whisk to knead dough or mix cake mixtures.
7.
Do not run the appliance for more than 2 minutes per time.
SLICING AND SHREDDING
1.
Firstly place the drive shaft onto the motor base, make sure it is in position.
2.
Place the chopping jar on the Motor Base from the unlock position and turn
clockwise until the chopping jar locks into position. Make sure it is assembled
correctly, otherwise the appliance will not operate.
3.
Fit the shredding blade or slicing blade or chipping blade into the disk stand, place
them in the bowl. For assembling, firstly place the side of the blade with the long
tab into place, then push in the other side. For disassembling push out the side
with the short tab.
4.
Place the lid onto the chopping jar and turn it clockwise until the tab of the lid clicks
into slot in the jar handle. Make sure it is locked into position correctly, otherwise
the appliance will not operate.
5.
Turn the speed selector to 1 or 2 setting to start.
Note: the shredding/slicing/chipping disks can slice thickly-potatoes, onions,
thinly-cucumbers, boot root, apples, and carrots.
6.
Use the food pusher to feed food into the feeding funnel. The food shall be cut into
proper size to suitable for the feeding funnel. You can slice/grate up to 1000g of
food.
7
8
Advertisement
