Acer Aspire TC-780 Service Manual page 93

Checkpoint
50
52
60
75
78
7A
7C
84
85
87
8C
8E
90
A0
A1
A2
A4
A7
A8
A9
AA
AB
AC
B1
00
Aspire TC-780 Desktop Computer Service Guide
Description
Programming the memory hole or any kind of implementation that needs an adjustment in
system RAM size if needed.
Updates CMOS memory size from memory found in memory test. Allocates memory for
Extended BIOS Data Area from base memory. Programming the memory hole or any kind
of implementation that needs an adjustment in system RAM size if needed.
Initializes Num-Lock status and programs the KBD typematic rate.
Initialize Int-13 and prepare for IPL detection.
Initializes IPL devices controlled by BIOS and option ROMs.
Initializes remaining option ROMs.
Generate and write contents of ESCD in NVRam.
Log errors encountered during POST.
Display errors to the user and gets the user response for error.
Execute BIOS setup if needed / requested. Check boot password if installed.
Late POST initialization of chipset registers.
Program the peripheral parameters. Enable/Disable NMI as selected.
Late POST initialization of system management interrupt.
Check boot password if installed.
Clean-up work needed before booting to OS.
Takes care of runtime image preparation for different BIOS modules. Fill the free area in
F000h segment with 0FFh. Initializes the Microsoft IRQ Routing Table. Prepares the
runtime language module. Disables the system configuration display if needed.
Initialize runtime language module. Display boot option popup menu.
Displays the system configuration screen if enabled. Initialize the CPU's before boot,
which includes the programming of the MTRR's.
Prepare CPU for OS boot including final MTRR values.
Wait for user input at config display if needed.
Uninstall POST INT1Ch vector and INT09h vector. Deinitializes the ADM module.
Prepare BBS for Int 19 boot.
End of POST initialization of chipset registers.
Save system context for ACPI.
Passes control to OS Loader (typically INT19h).
85