Registering Magic Remote Control; Troubleshooting - LG 55SK9500PUA Owner's Manual

* (MUTE) Accesses the Accessibility
menu.
Scrolls through the saved channels.
* (Voice recognition)
Network connection is required to use the voice
recognition function.
Once the voice display bar is activated on the TV
screen, press and hold the button and speak your
command out loud.
(HOME) Accesses the Home menu.
* (HOME) Shows the previous history.
Wheel (OK) Press the center of the Wheel
button to select a menu. You can change channels
by using the Wheel button.
(up/down/left/right) Press the up, down, left or
right button to scroll the menu. If you press
buttons while the pointer is in use, the
pointer will disappear from the screen and Magic
Remote will operate like a general remote control.
To display the pointer on the screen again, shake
Magic Remote to the left and right.
Returns to the previous level.
* Clears on-screen displays and returns to
last input viewing. Displays the program event
according to time scheduler.
, Streaming Service buttons Connects to the
1 2
Video Streaming Service.
(INPUT) Changes the input source.
* (INPUT) Displays all the lists of external
inputs.
(Q. Settings) Accesses the Quick Settings.
* (Q. Settings) Displays the All Settings
menu.
, , , These access special functions in
some menus.
, Control buttons for media contents
By zooming in on the selected area, you
can view it in full screen.
* You can zoom in on the area where the
remote control is pointed.

Registering Magic Remote Control

How to register the Magic Remote Control
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the
TV on.
2 Point the Magic Remote at your TV and press the
Wheel (OK) on the remote control.
* If the TV fails to register the Magic Remote, try
again after turning the TV off and back on.
How to deregister the Magic Remote Control
Press the and (HOME) buttons at the same
time, for five seconds, to unpair the Magic Remote
with your TV.
* Pressing and holding the
cancel and reregister Magic Remote at the same
time.
• Do not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.
• Failure to match the correct polarities of
the battery may cause the battery to burst
or leak, resulting in fire, personal injury, or
ambient pollution.
• This apparatus uses batteries. In your
community there might be regulations
that require you to dispose of these
batteries properly due to environmental
considerations. Please contact your local
authorities for disposal or recycling
information.
• Batteries inside or inside the product shall
not be exposed to excessive heat such as
sunshine, fire or the like.

Troubleshooting

Cannot control the TV with the remote control.
• Check if anything such as tape has been placed
over the receiver.
• Check if there is any obstacle between the
product and the remote control.
• Replace the batteries with new fresh ones. No
image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall
outlet.
• Check if there is a problem in the wall outlet by
connecting other products.
The TV turns off suddenly.
• Check the power control settings. The power
supply may be interrupted.
• Check if the auto-off function is activated in the
settings menu.
• If there is no signal while the TV is on, the TV will
turn off automatically after 15 minutes of
inactivity.
button will let you
13