Download Print this page

Bush BCCH60X INOX Installation & User's Instructions

Hide thumbs Also See for BCCH60X INOX:

Advertisement

Quick Links

Installation & User Instructions - Please keep for future reference
Important
These instructions contain important information which will help you get the best from
your appliance and ensure safe and correct installation, use and maintenance.
If you need help or have damaged or missing parts, call Argos Product Support 01759 487838
Cat no
5038462 BUSH BCCH60X INOX
4877796 BUSH BCCH60B BLACK
– Please read these instructions fully before installing or using
Hood
Model
Issue 1 - 26/05/15

Advertisement

loading

Summary of Contents for Bush BCCH60X INOX

  • Page 1 Hood Installation & User Instructions - Please keep for future reference Cat no Model 5038462 BUSH BCCH60X INOX 4877796 BUSH BCCH60B BLACK Important – Please read these instructions fully before installing or using These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.
  • Page 2: Table Of Contents

    Contents Dear customer, the following sections contain information on safe and efficient use of the equipment. Please read carefully before attempting to install the equipment. Safety Information....………………………………...……2 Parts Identification/ Technical specifications ........3 Technical dimensions ................ 4 Mounting instructions ..............5-6-7 Operating instructions ................
  • Page 3: Safety Information

    Safety Information 1. Electrical connections and installation of this product must be done by qualified service personnel. 2. Operating voltage is 220-240 Volts. Do not use under lower or higher voltages. 3. The exhaust connection of this product should not be made to a chimney that is already connected to any other ventilation or heating devices 4.
  • Page 4: Parts Identification/ Technical Specifications

    Parts Identification Figure A1 1- Inner flue sheet 2- Outer flue sheet 3-Cable 4- Glass 5- Control icons 6-150/120 mm Outlet adaptor Technical specifications Hood technical specifications LENGTH 598-898 mm 105 W MOTOR POWER WIDTH 500mm 155 W TOTAL POWER Min 530 Max 1010 mm AIR OUTLET PIPE DIAMETER 120 mm/150 mm...
  • Page 5: Technical Dimensions

    Technical dimensions Figure A2...
  • Page 6 Installation instructions Installation distances CEILING drill with Ø7 drill bit Flue connection apparatus drill with Ø8 drill bit Mounting plate Cooker Figure A4...
  • Page 7 Installation instructions Regulations and standards Before you start please read instructions carefully. All installations, service and repair work must be in accordance with local standards and regulations. In the UK the regulations and standards are as follows: 1. Building regulations. 2.
  • Page 8 Installation instructions Hood flue assembly and completion of the mounting works Note : You are required to buy Ø120 mm or Ø150 mm semi-rigid aluminium duct and 2 connecting clamps for the flue assembly. We recommend you to use Ø150 mm semi-rigid duct. 1- Flue mounting apparatus 2- Ø7 Threaded insert 3- 3,9x9,5mm pan head screw...
  • Page 9: Operating Instructions

    Operating instructions Push button operating instructions (0 button): Stops the motor. (1 button): Motor starts-up at Speed 1. (2 button): Motor starts-up at Speed 2. (3 button): Motor starts-up at Speed 3. (Lamp button: ): It is used to turn the lamp on and off.
  • Page 10: Maintenance Instructions

    Maintenance Instructions Unplug the product or turn off the switch before commencing maintenance works on the product. Aluminium filter cleaning; Aluminium filter is used to trap the oil particles in the air, therefore it is blocked based on the requency of use and leads to performance loss with the product. Accumulated grease layer poses a risk of catching fire.
  • Page 11 Maintenance instructions Carbon filter replacement; Carbon filter is an optional component produced with the purpose of using the range hood without flue connection. Figure A9 Figure A10 Carbon filter removal; 1- Unplug the hood or turn off the fuse switch. 2- Remove the aluminium filter in order to reach to the carbon filter.
  • Page 12: Troubleshooting

    Troubleshooting Please read the following information carefully before calling an authorized technical service. Hood does not function! - Make sure that the power cable of the equipment is connected to the power socket. - Check the fuse switches. Hood functions but the light is off! - Unplug the product and check whether the lamps are intact and they are loose.
  • Page 13 Notes: ............................................................................................................................................................................................................................................................................................................................................................
  • Page 16 Guarantee Argos Product Support 01759 487838 Product Guarantee This product is guaranteed against manufacturing defects for a period of Year This product is guaranteed for 12 months from the date of original purchase. Any defect that arises during this period due to faulty materials or workmanship will either be repaired free of charge or replaced.

This manual is also suitable for:

Bcch60b black