3.2 Cabling
3.2.1 Power supply
Check the power rating on your outlet before connecting A
power strip. Contact your facilities manager or a qualified electrician if you are not sure
what type of power is supplied to your building.
A
is designed to operate with single-phase power systems having a grounded neutral
RGUS
conductor. To reduce the risk of electrical shock, do not plug into any other type of power
system.
To connect P
and the O
ROCESSOR
•
If using an O
B
with redundant power supply first connect an equipotential bondig conductor to the
MNI
US
connector [28].
•
Plug the female end of the power cords into the mains connections of each P
respectively.
•
Plug the male end of each power cord into a power outlet.
3.2.2 Mouse
The standard mouse is a PS/2 mechanical mouse. Plug it into the PS/2 mouse jack [26].
3.2.3 Keyboard
The standard keyboard is a MF-II type keyboard with a PS/2 connector. Plug it into the PS/2 keyboard jack [27].
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
B
devices to the power supply, follow these steps:
MNI
US
to the wall outlet or to a
RGUS
[25] and O
ROCESSOR
_____________________________________________________________________
3. Getting started
B
[27]
MNI
US
Figure 3-9
Mains connection of A
RGUS
Figure 3-10
PS/2 mouse jack
figure 3-11
PS/2 keyboard jack
3-9