Advertisement
Photo mode
While recording is stopped, short press the MODE / SOS (5) button one time. This brings you to the
Photo mode. While you are in Photo Mode, press the OK button to snap a photo.
GPS
The GPS feature loads automatically and requires no setup. However, this function will not work
indoors. Once outside the unit will sync with GPS satellites automatically and capture GPS
coordinates.
Parking Monitor (Off by default)
Parking monitor leaves the G-Sensor on while the unit is off. When the Dash Cam feels a jolt, the unit
will power on and start recording.
To activate it, set it to something other than OFF under the General Settings menu.
Motion Detection (Off by default)
Motion Detection is used when the Dash Cam is on. When the camera sees motion, such as a tree
leaf falling down in front of the unit, the camera will start recording. On the LOW setting it is less likely
to trigger, whereas on High even a small leaf falling down could trigger it.
Please Note: Using Motion Detection can use up a lot of space and battery power. The manufacturer
recommends not using this setting while driving, as the camera may stop recording when it stops
sensing motion (such as at a red light). It is best used when parked and you want to use the camera
for security purposes.
To activate it, set it to something other than OFF under the General Settings menu.
Viewing Recordings
Power on the unit, stop the recording, and hit the MODE / SOS (5) button twice. Use the UP and
DOWN buttons to navigate the through the files and press OK to select a recording. Press the Menu
button to access the Playback menu. Here you can use the UP and DOWN buttons to Delete,
Protect, or view the Video Type. You can select to delete one (the selected file) or delete all files).
You will be asked to confirm your choice. Use the UP and DOWN buttons to move the selection and
OK to confirm.
Exporting Videos and Pictures
Remove the MicroSD card from the Dash Cam and insert the card into the card reader on your
computer. You may need a standard size SD card adapter or an external reader if your PC does not
have a MicroSD card slot. Once inserted, open the file browser on your computer and locate the SD
card disk. Copy and paste the files you would like to download into a local folder.
AV-OUT Video / Audio output
A 2.5MM Headphone to RCA plug can be used to connect your Dash Cam to any screen that
supports a RCA input.
Using the WiFi Cam Viewer Mobile App
Open your phone's app store (Android or Apple) and search for AIT WiFi Cam Viewer (by Canlet).
Power on your dash cam, stop the recording and hit the Menu button. Press the Screen Toggle
button to select the General Settings menu. Use the UP and DOWN buttons to navigate to WiFi
Advertisement
