Introduction; Intended Use Of Smartdrive Mx2+ App; Warnings And Safety Precautions - Permobil PushTracker E2 User Manual

SmartDrive MX2+ | PushTracker E2

1. Introduction

Intended Use of SmartDrive MX2+ App

The SmartDrive MX2+ software application (app) is intended to be used on the Push-
Tracker E2 (TicWatch E2) to operate the SmartDrive Wheelchair Power Assist device.
Refer to the labeling and documentation of other components or product for their
intended use, instruction, wireless, EMI and all other specification / information.

Warnings and Safety Precautions

All warnings and safety precautions issued by one' s wheelchair manufacturer
must be heeded in addition to those stated in this and any other provided
manuals / instructions / guides, to include that provided within the
SmartDrive MX2+ app. Failure to do so could result in serious injury or death.
Use of the SmartDrive MX2+ app or the SmartDrive by anyone who has not received
proper instruction from this manual, the SmartDrive User' s Manual and any other
provided manuals / instructions / guides may result in serious injury or death.
Use of the SmartDrive MX2+ app is to be ONLY on the PushTracker E2 (TicWatch
E2) through its release in the applicable app Store(s) as made available by Permobil
[SmartDrive] / Max Mobility.
Always inspect your PushTracker E2 for missing parts / damage prior to each use.
Make sure your PushTracker E2 is charged before use.
When crossing major roads, intersection, railway crossings or highways as well as when
you drive steep, long slopes you should always consider having somebody accompany
you in the interest of your safety.
The PushTracker E2 should ONLY be worn by the user sitting in the wheelchair with
the SmartDrive attached.
Always turn OFF the power assist [via SmartDrive MX2+ app] when parked to
prevent accidental activation.
Always turn OFF the power assist [via the SmartDrive MX2+ app] before taking the
PushTracker E2 off of your wrist.
(continued on next page...)
3