Table of Contents
Advertisement
DIMMER SWITCH
The foot button switches the headlights between
"high" and "low" beam
.
The red "high" beam indicator
will be lighted when the headlights are on "high" beam.
Always dim the lights when approaching oncoming
cars.
"-
TURN SIGNAL
The turn signal lever should be moved UP to signal
a right turn or DOWN to signal a left turn. The green
turn signal indicators in the instrument panel will signal
the direction as will the front and rear turn signal lamps.
When the turn is completed, the lever will automatically
return to neutral position.
Get into the habit of turning
on the signal well in advance of
where you plan to turn. Drivers
who are following will appre-
ciate your consideration.
LIGHTING SYSTEM TROUBLE CHECKS
•
If headlights flicker on and off Intermittently, your
Authorized Chevrolet Dealer should be called upon
immediately to correct the overload condition.
•
If the tail light fuse blows out, the instrument panel
lights will also be
inoperative.
Check both the instru-
ment panel fuse and the tail light fuse. (See page 39.)
•
If, when signalling a turn, the green turn signal indi-
cator comes on but does not flash, a burned out front
or rear tu rn signal lamp on that side or an improper
11
flasher (3-bulb instead of 2-bulb flasher) is indicated.
•
If the green turn signal indicator comes on and stays on
but does not flash when signaling a turn in
either
direction, and no "clicking" is heard, replace the
flasher.
•
If flasher clicks but the green turn signal indicator does
not operate, replace the indicator
bulb.
•
A series-type, 2-bulb flasher is standard equipment on
Corvairs.
Always replace with the same type flasher.
Advertisement
Table of Contents
