Scanning Process - HEIDELBERG Nexscan F 4100 Operation

Working with the Nexscan F 4100/F 4200

Scanning Process

first fast scan
first fast scan
Batch Operation
ICC profiles
4–6
After you have mounted the originals, the actual
scanning process can begin.
The scanning process is controlled via a PC or
Macintosh computer.
For Newcolor:
2
Note: The most important settings for the"First
fast scan" can be found in the documentation:
Newcolor 7000 Workflow, chapter 2.
0
For further information, refer to:
Newcolor 7000 – Reference
0
For Linocolor:
2
Note: The most important settings for the"First
fast scan" can be found in the documentation:
LinoColor – User's Guide, chapter 2.
0
For further information, refer to:
Linocolor – Reference
0
For information on batch processing, scheduling
jobs in the print queue etc., refer to:
JobAssistant – Operation
0
Both latter mentioned documents are available on
your target volume in the documentation folder
after Linocolor has been installed.
You can generate your own ICC profiles using the
programs from ColorOpen, such as
Printopen
0
Scanopen
0
Viewopen
0
ABC
Edition September 2000