Stereo/Dual Reception (In Analogue Mode Only); Nicam Reception (In Analogue Mode Only); Speaker Sound Output Selection (In Analogue Mode Only) - LG 32LC2D Series Owner's Manual

U0585Ben_03 12/6/06 11:08 AM

STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)

When a programme is selected, the sound information
for the station appears after the programme number and
station name disappear.
Mono sound selection
A
If the stereo signal is weak in stereo reception, you can switch to mono by pressing the
In mono reception, the depth of sound is improved.
To switch back to stereo, press the
Language selection for dual language broadcast
A
If a programme received two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by
pressing the
DUAL I Sends the primary broadcast language to the loudspeakers.
DUAL II Sends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.

NICAM RECEPTION (IN ANALOGUE MODE ONLY)

If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by pressing the
repeatedly.
1
When NICAM mono is received, you can select NICAM MONO or MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or MONO. If the stereo signal is weak,
switch to MONO.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or
MONO.
SPEAKER SOUND OUTPUT SELECTION
In AV1, AV2, SAV2, AV3, AV4, Component, RGB and HDMI/DVI (or HDMI1/DVI or HDMI2) mode, you can select
output sound for the left and right loudspeakers.
1
Repeatedly press the
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is
sent to the right loud speaker.
L+L: Audio signal from audio L input is sent to left and right loud speakers.
R+R: Audio signal from audio R input is sent to left and right loud speakers.
Page 67
I/II button twice again.
I/II button repeatedly.
I/II button to select the sound output.
Broadcast
On Screen Display
Mono MONO
Stereo STEREO
Dual DUAL I
I/II button twice.
I/II button
67