LG 32LC2D Series Owner's Manual page 20

U0585Ben_01 12/6/06 11:05 AM
CONNECTIONS & SETUP
3. When connecting with a Euro Scart
Back panel of the set
ANTENNA
OUT
ANTENNA
!
NOTE
If the S-VIDEO(Y/C)
G G
SAV2 mode.
If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
VIDEO
G G
4. When connecting with an S-Video cable
OUT
(R) AUDIO (L) VIDEO
IN
VIDEO
!
NOTE
If both S-VIDEO
G G
VIDEO can be received.
20
Page 20
AV 1 AV 2 DTV OUT DTV OUT
IN
1
(R) AUDIO (L)
AUDIO/
VIDEO
signal is received through the Euro scart socket 2 (AV2), you must change to the
AUDIO S-VIDEO COMPONENT IN
( )
VIDEO
AUDIO
ANT IN
S-VIDEO ANT OUT
OUTPUT
SWITCH
3 4
VCR
2 1
Back panel of the set
AUDIO S-VIDEO COMPONENT IN
( )
MONO
VIDEO VIDEO
AUDIO
and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-
1 Connect the Euro scart socket of the VCR to
the AV1 Euro scart socket on the set.
2 Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
3
AV1
Select input source with using the
button on the remote control.
- If connected to
AV2 input source.
VCR
1
Connect the S-VIDEO output of the VCR to
S-VIDEO
the
quality is improved; compared to normal com-
posite (RCA cable) input.
2
Connect the audio outputs of the VCR to the
AUDIO
input jacks on the set.
3
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
4
Select AV3 input source with using the
button on the remote control.
INPUT
AV2 Euro scart socket, select
input on the set. The picture
INPUT