Understanding The Measurement Window - southern science supply MicroSight 1.3MP User Manual

UNDERSTANDING THE MEASUREMENT WINDOW

Reference Unit - Select a unit for calibration and
measurement. Choose from three units: mm/inch/mil
Reference Size - Select
the reference size for
calibration.
Measure Mode - Select a measurement
mode from the following options:
Angle/Circle/Ellipse/Line/
Rectangle/Triangle/3DotsRadius.
Delete - Click the
measurement data and
click the delete button to
delete the data.
Show Cross Line - Check
the Cross Line if you want
this function for accurate
measurement.
Add Date/Time/Notes - Add notes and
data times in the image.
Accuracy - The number is accurate up
to nine decimal points. measurement.
Choose from three units: mm/inch/mil
14
Clear All - Delete all
measurement data.
IMPORTANT
After you take a
measurement, remember
to take a snapshot of
the image to save
the measurements.
Camera
Use the
icon on the Tool Bar
to take the photo.