Advertisement
TECHNICAL SPECIFICATIONS
Front suspension - steering
Wheel suspension
Torsion bar diameter
Stab i Iizer dia.
Shock
absorber
Manufacturer
Steering gear
Steering wheel dia.:
Standard
Optional
Steering ratio in the
center
angle
to wheel angle)
Turning
circle dia.
Steer
ing wheel turns from stop to
Steering friction (measured on
with tie
rods
disconnected)
Rear suspension
Wheel
suspension
Torsi on bar diameter
I izer
Stabi
Shock absorbers
Manufacturer
Woodhead
Boge
Spring plate adjustment (inclination)
for standard
models
and
for models with air conditioning
1°
spring
plate inclination
(steering wheel
stop
steering
flange
approx.
8 to 9 mm (0.3 to 0.35 in .) change in hight of vehicle.
=
Independently suspended wheels on A-arms
and struts, one torsion bar for each wheel
18.8 mm/0.74 in
.
16 mm/0.63 in.
Double acting hydraulic shock absorber
Boge/color coded
ZF rack and pinion
400 mm115.75 in
380 mm114.96 in
17.78
:
1
10.9 mtr.l36.76 ft.
3.1
0.8 to 1.4 Nm (8 to 14 kpcm)
I ndependently
suspended
torsion bar for each wheel
23 mm/0.9 in.
Double acting hydraulic shock absorbers
Either Boge or Woodhead
Blue with yellow test band
Black with yellow test band
33
:
black with yellow test band
.
.
wheels on A-arms, one
.
Advertisement
