System Settings - Furuno DS-50 Operator's Manual

System Settings

The system settings do not require frequent adjustment. The table below shows setting range and
default setting for each parameter.
No. Item
1 Ground speed offset
2 Water speed offset
3 Transducer installation offset
4 Trim angle offset
5 Heel angle offset
6 Speed averaging
7 Reference water speed depth
8 External KP1 distance
9 External KP2 distance
10 Unit of keel clearance measurement
Note: The above settings are retained with an internal battery when the power is off.
Setting Range
-12.8 to+12.7%, 0.1% steps
-12.8 to +12.7%, 0.1% steps
-12.8 to +12.7°, 0.1° steps
-12.8 to +12.7°, 0.1° steps
-12.8 to +12.7°, 0.1° steps
15, 30, 60, 90 sec
2.0 to 25.0 m, 1 m steps
0.0 to +300.0 m, 0.1 m steps
0.0 to +300.0 m, 0.1 m steps
m/ft/fa
11
Default Setting
0%
0%
0°
0.0°
0.0°
15 sec
2 m
0.0
0.0
m