Acument Avdel TX2000 Avdelok Instructions

TX2000 Avdelok
®
Instructions for Collar Cropper Attachment
S a f e t y R u l e s
This technical datasheet must be read with particular attention to the safety rules listed in the TX2000
07900-00759 and to the following safety rules, by any person fitting or operating the collar cropper and TX2000
1
Do not use collar cropper outside the design intent printed below.
2 Do not use equipment or tools with this collar cropper other than that recommended and supplied by Avdel UK Limited.
3 The tool and collar cropper must be maintained in a safe working condition at all times. The operator must follow the daily and weekly
service checks detailed in the TX2000
4 The tool and collar cropper shall at all times be operated in accordance with the relevant health and safety legislation. Any question
regarding the correct operation of the tool and operator safety should be directed to your local Avdel UK Limited company or authorized
representative.
5 Do not operate a tool that is pointed towards any person(s).
6 Do not operate the tool if it is not fitted with a complete collar cropper assembly.
7 FINGERS AND ALL BODY PARTS MUST REMAIN CLEAR OF THE COLLAR CROPPER WHEN OPERATING THE TOOL.
8 When using the tool and collar cropper, the wearing of safety glasses is required both by the operator and others in the vicinity to protect
against ejection of debris. We recommend wearing gloves if there are sharp edges or corners on the application.
9
Take care to avoid entanglement of loose clothes, ties, long hair, cleaning rags etc., in the moving parts of the tool and collar cropper.
10 When carrying the tool from place to place keep hands away from the trigger to avoid inadvertent start up.
11 Remove the battery when not in use, or when fitting or removing the collar cropper.
I n t e n t o f U s e
The collar cropper attachment in combination with the TX2000
fasteners from 4.8mm (3/16") to 6.4mm (1/4"). The correct collar cropper kit must be selected for each fastener size and type as shown in
the table on this page.
The tool and collar cropper must be used in accordance with the safety rules and fitting instructions contained within this
datasheet. The cropping of other fastener sizes or materials not included in the table on this page could have a detrimental
impact on the working life of the tool and collar cropper and could invalidate the warranty.
/Maxlok Collar Cropper
® ®
Instruction Manual.
®
tool is designed for cutting and removing Avdelok
®
I M P O R T A N T
Instruction Manual
®
tool.
®
and Maxlok collars from
® ®