Syrp Genie II Linear Setup Manual page 28

- If the Genie II Linear is suddenly brought in from the cold into
a warm room, condensation may form on the Genie II Linear. Do not
use the Genie II Linear. This is to avoid damaging it. If there is condensa-
tion, remove any accessories and wait until the condensation has evaporated
before using again.
- Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing
so may cause fire or a health hazard.
- Only use attachments/accessories specified by Syrp.
- Refer all servicing to qualified service personnel.
- Servicing is required when the Genie II Linear has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled, objects have fallen onto the Genie II Linear, the Genie
II Linear has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Do not store the equipment in dusty or humid places
- Do not use the Genie II Linear in hospitals or airplanes. Electromagnetic waves emitted by the Genie
II Linear may interfere with the planes instruments or medical equipment.
BATTERY WARNINGS
You must read these safety instructions and warnings before using or charging your
batteries. Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the
below instructions may result in fire, personal injury and damage to property if
charged or used improperly.