Syrp Genie II Linear Setup Manual page 27

IMPORTANT PRODUCT SAFETY INSTRUCTION
READ THESE INSTRUCTIONS. KEEP THESE INSTRUCTIONS.
FOLLOW THEM CAREFULLY.
- Do not use the Genie II Linear for anything other than creating motion control
time-lapse photography and video.
- Never use the Genie II Linear above people or animals or close to motor vehicles, railway
stations, highways, railway lines, schools, city centres or other public or sensitive areas. The
Genie II Linear could fall and cause personal injury or damage.
- Always ensure the Genie II Linear is securely attached to support accessories.
- Never operate when Genie II Linear's Quick Release is not fully locked. The plate should be fully
submerged into the Genie II Linear.
- Always ensure the Quick Release plate is level and fully inserted in the Quick Release Base.
- Never use the Genie II Linear hanging upside down.
- Always ensure when attaching the Genie II Linear to a tripod, slider or other accessory that it is
fully secured.
- Never put any object or body part in the path of the Genie II Linear movement.
- Avoid storing the Genie II Linear where there are corrosive chemicals such as a
darkroom or chemical lab.
- Clean only with a dry cloth.
- Never leave the Genie II Linear near anything having a strong
magnetic field such as a magnet or electric motor. Also avoid
using or leaving the Genie II Linear near anything
emitting strong radio waves such as a
large antenna.