This Unit's Name On The Network "Friendly Name; To Check The Mac Address Of This Unit "Mac Address - Technics SL-G700 Operating Instructions Manual

This unit's name on the network
"Friendly Name"
You can change this unit's name on the network
(e.g. "Room 1" or "Living Room" etc.).
1 Press [NWP].
2 Press [SETUP].
3 Press [ ], [ ] repeatedly to select
"Network" and then press [OK].
4 Press [ ], [ ] repeatedly to select
"Friendly Name" and then press [OK].
• The current name of this unit is displayed. Press
[OK] to edit.
5 Press [ ], [ ], [ ], [ ] to input the
friendly name.
• Only ASCII characters can be used.
• "A" can be added when you press the [
the time of the last letter of the Friendly Name
is selected.
• Press [CLEAR] to delete a letter.
• Press [ 10] to insert a letter "A".
• Default name is "Technics-SL-G700-
****
" " stands for a number that is unique to
each set.
6 Press [OK] to apply the settings.
7 Press [RETURN] to exit the settings.
• When Friendly Name is not displayed properly,
delete and input the friendly name again. If the
problem still persists, restore all the settings to the
factory defaults. (⇒ 87)
To check the MAC address of this
unit
"MAC Address"
1 Press [NWP].
2 Press [SETUP].
3 Press [ ], [ ] repeatedly to select
"Network" and then press [OK].
4 Press [ ], [ ] repeatedly to select "MAC
Address" and then press [OK].
• The MAC address of this unit is displayed.
5 Press [RETURN] to exit the screen.
35
] at
****
".
(Continued)