Connecting To An Amplifier - Technics SL-G700 Operating Instructions Manual

Connections

Connecting to an amplifier

You can output analogue audio signals from
this unit and play back music.
Connecting to an amplifier
Amplifier with
unbalanced input
terminals
*
: We recommend using cables with a length of
3 m or less.
• For details, refer to the operating instructions of
the connected device.
• Do not use any other analogue audio cables except
the supplied one.
• When you connect a power amplifier, etc., set
"A.Output Level" to "Variable" for volume control
with this unit. When you connect a pre-amplifier,
etc., set "A.Output Level" to "Fixed" for volume
control with the connected device. (⇒ 72)
 The factory default is "Fixed".
XLR cable *
Analogue audio
cable (supplied)
Amplifier
25
(not supplied)
Amplifier with
balanced input
terminals