Troubleshooting; Service - JAVAC PCS-2 Manual

5.0 TROUBLESHOOTING

PROBLEM
Scale will not operate
Vacuum pump will not start or has
stopped

6.0 SERVICE

DO NOT CHANGE any of these components as the safety of the machine could be
compromised. All service work must be performed at a JAVAC approved facility in
order to maintain the safety rating and the Warranty (if applicable).
Technical assistance and service information can be obtained by contacting:
JAVAC UK
Or the Organisation where you purchased your PCS-2
The vacuum pump oil used for the PCS-2 is specific and has been certified as safe
and reliable to use. Do not use generic vacuum pump oil as its viscosity index is
too high. Replace with Javac Shark/Minivac oil part no. VC2063
THANK YOU FOR SUPPORTING AN AUSTRALIAN COMPANY
CAUSE
Flat battery
Faulty scale
Pump has seized
Pump has overheated
Internal fuse in pump has blown
+44 (0) 1642 232 880
ACTION
Replace battery
Return to JAVAC for repair or
replacement
Return to JAVAC for repair or
replacement
Let pump cool down until thermal
overload resets. Ensure adequate
airflow around unit.
Return to JAVAC for repair