Siemens SIMEAS Q80 Operating Instruction page 115

10.2.5.5 SYNC terminal
For synchronization of the SIMEAS Q80 7KG8080 units by DCF77 or IRIG-B, the device has a BNC
socket labeled SYNC. Find more information about setup and configurations in section
.
40
Note
10.2.5.6 RS232 Connection for external modem
By means of this DSUB-9 terminal, an external modem (RS232) can be connected. For modem
operation, the SIMEAS Q80 7KG8080 can be configured as a PPP-server, see also System manual of
the software SIMEAS Q80 Manager.
Pin configuration of the modem terminal
10.2.5.7 Slot for CF-card
SIMEAS Q80 7KG8080 uses COMPACT FLASH (CF) cards exclusively as removable storage
media. For legacy reasons, the CF card is sometimes displayed as "Removable storage(PCMCIA)".
CF-cards with volumes of up to 16 GB can be used at this time. When exchanging the CF-card, the
device must be previously notified by pressing the button directly below the CF-card slot. When the
Status-LED flashes, this indicates the device is ready for exchanging the CF-card. Then the CF-card
can be exchanged.
Please note the information to the
Note that devices whose production date is earlier than June, 2010 were equipped with an
SMB socket.
Connections and Conditioning
76
internal disk.
45
Power Quality Recorder SIMEAS Q80 7KG8080, Operating instruction
Synchronisation
E50417-B1074-C419-A2, Release 09.02.2011
E-39