Montage- und Betriebsanleitung Brillant LED Deckeneinbau-Einzelbatterieleuchte 1883...1884 LED CGLine Aufbau der Leuchte / Construction of the luminaire Brillant 1883...1884 LED CGLine Abb. 1 1 Befestigungsschraube / fixing screw 2 opt. Abdeckblende metall/ opt. metal cover plate 2a Abdeckblende Kunststoff m. Rasthaken / plastic cover plate with hooks 3 Piktogrammscheibe / pictogram panel 4 Modulträger mit LED-Leiste / module carrier with LED-strip...
Montage- und Betriebsanleitung Brillant LED Deckeneinbau-Einzelbatterieleuchte 1883...1884 LED CGLine 3. Sicherheitshinweise p Die Leuchte ist bestim mungs gemäß in unbeschädigtem und einwandfreiem Zustand zu betreiben! p Als Ersatz dürfen nur Originalteile von CEAG verwendet werden! p Bei Arbeiten an der Notleuchte ist erst das Netz (Ladephase und L’) abzuschalten und dann der Batteriekreis zu unterbrechen.
Montage- und Betriebsanleitung Brillant LED Deckeneinbau-Einzelbatterieleuchte 1883...1884 LED CGLine 5.1 Kurzbeschreibung / Verwendungsbereich Die Rettungszeichenleuchten Brillant 1883...1884 LED CGLine sind als Einzelbatterieleuchten in Installationen nach EN 50172, DIN VDE 0100-718 und E DIN VDE 0108-100 geeignet. Die Einzelbatterieleuchten CGLine können mit dem CEAG CG-Controller CGLine 400 oder dem CGLine Web-Interface über eine Busleitung zentral überwacht werden.
Montage- und Betriebsanleitung Brillant LED Deckeneinbau-Einzelbatterieleuchte 1883...1884 LED CGLine Netzkabel an den Klemmen N, L, L‘ und Funktions-PE auf der Leiterkarte anschließen, wobei L als ungeschaltete Dauerversorgung der Elektronik und L‘ über einen Lichtschalter zur bedarfsabhängi- gen Schaltung der Leuchte dient. Jede Leuchte kann wahlweise mit bedarfsabhängiger Lichtschaltung (geschaltetes Dauerlicht), in Bereitschaftslichtschaltung (ohne Brücke L-L‘), sowie in Dauerlichtschaltung (mit Brücke L-L‘) be- trieben werden.
Montage- und Betriebsanleitung Brillant LED Deckeneinbau-Einzelbatterieleuchte 1883...1884 LED CGLine Jede an der Daten-Bus-Leitung angeschlossene Leuchte wird vom CG-Controller automatisch erkannt. Der CG-Controller kann den angeschlossenen Leuchten eine Kurzadresse zuweisen, die über die drei LEDs an der Leuchte abgefragt werden kann. grün gelb rot TEST Mit der Test-Taste können gestartet und angezeigt werden:...
Montage- und Betriebsanleitung Brillant LED Deckeneinbau-Einzelbatterieleuchte 1883...1884 LED CGLine 6.4 Kontroll-LEDs Kodierung der Fehleranzeige: Status LED Grün LED Gelb LED Rot Keine Störung � � � Notlicht � � � Nachlaufendes Notlicht im Wechsel ca. 1 Min. � � � Leuchte im Funktionstest (FT) �...
Mounting and Operating Instructions Brillant LED Self contained luminaire for ceiling mounting 1883...1884 LED CGLine 3. Safety Notes p The luminaire shall only be used for its intended purpose and in an indamaged and perfect condition! p Only genuine CEAG spare parts may be used for replacement and repair! p When working on the emergency luminaire first cut off mains (charging phase and L’) and inter- rupt battery operation.
Mounting and Operating Instructions Brillant LED Self contained luminaire for ceiling mounting 1883...1884 LED CGLine 6. Installation / Operation For the mounting and operation of electrical apparatus, the respective national safety regulati ons as well as the general rules of engineering will have to be observed! 6.1 Mounting Mount the pictogram panel true sided and in correct position with the bolts.
Mounting and Operating Instructions Brillant LED Self contained luminaire for ceiling mounting 1883...1884 LED CGLine Mains cable should be connected to the terminals N, L, L‘ and PE on the printed circuit board, where L is an unswitched permanent connection for the electronics and L‘ is used for switching the lamp on and off with a light switch as and when required.
Mounting and Operating Instructions Brillant LED Self contained luminaire for ceiling mounting 1883...1884 LED CGLine green yellow red TEST The following can be started and displayed with the test-button: - function test ON - duration test ON/OFF - duration test delayed - settings of the emergencylight operating time with subsequent identification of the luminaire short address (when data bus is connected and the CG-Controller has issued short addresses).
Mounting and Operating Instructions Brillant LED Self contained luminaire for ceiling mounting 1883...1884 LED CGLine 6.5 Control LEDs Coding of the fault display: Status LED green LED yellow LED red No failure � � � Emergency mode � � � Delay-time on mains return alternately 1 min.
Page 15
Mounting and Operating Instructions Brillant LED Self contained luminaire for ceiling mounting 1883...1884 LED CGLine...
Need help?
Do you have a question about the CEAG Brillant 1883 LED GGLine and is the answer not in the manual?
Questions and answers