DHD 52 Series Manual page 11

9
Series 52 - 52/RX Mixing Console Manual
The mixing console has a modular design, which allows to combine different modules for different applications. All fader
and control modules and TFT displays are linked to PoE switches and finally to the DSP frame via CAT5/6 cables. Modules
can be located apart from each other, as long as the specifications for cable length and power supply are met. The cable
lengths between the control panels and the DSP Frame can be up to 100 m with CAT6-cables. Even larger distances can
be realized with a conversion to fibre-optic cables.
There are two basic kinds of control modules – those containing faders and those without faders. Up to 12 fader modules
(48 faders) can be used together in one single mixing console.
Because the parts of the system are coupled by CAT5/6 cables, you can install them in your furniture at will instead of
having the furniture built around a more traditional mixing desk. The installation depth for the desk-mounted modules is
only 56 mm.
The mechanical construction of all modules is designed to withstand 24/7 use. Sturdy components like EAO Lumitas and
NKK keys, Penny & Giles faders and Lexan foil covers on all front panels let the 52/RX perform for a long time.
© 2010 DHD Deubner Hoffmann Digital GmbH
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
DSP frame and control desk coupled via Ethernet.