Panasonic CF-74 Series Supplementary Instructions Manual page 3

How to Use the Fingerprint Reader
This section explains how your fingerprints are enrolled and authenticated.
1
Slide your finger toward yourself.
To prevent a reading error.
A Set the first joint of your index finger on the
sensor as illustrated to the right.
B Slide your finger toward yourself while keep-
ing it in contact with the fingerprint sensor.
C Slide your finger down until the sensor is
visible.
When the fingerprint sensor does not en-
roll or authenticate your fingerprint prop-
erly:
· You slid your finger too fast or too slow.
· Your finger was soiled or it has a scar on
the surface.
· Your finger was wet or extremely dry.
· Your fingerprint does not have sufficient data for personal identification.
For further information, refer to "Troubleshooting (For Devices)". (
CAUTION
We shall not be liable for any loss or damage whatsoever resulting from
your Fingerprint device or neglect of Fingerprint device use, or any data
loss resulting from such developments as Fingerprint authentication
device malfunctioning.
Fingerprint sensor
page 13)
E
3