Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fieldmann FDBP 200951-E
Summary of Contents for Fieldmann FDBP 200951-E
- Page 1 FDBP 200951-E...
-
Page 3: Table Of Contents
SPECIAL SAFETY INSTRUCTIONS ..................... 10 USE AND OPERATION ........................12 WORKING WITH ANGLE GRINDER ..................14 CLEANING AND MAINTENANCE ................... 15 OPERATION AND MAINTENANCE HINTS ................16 DECLARATION OF CONFORMIT .................... 17 TECHNICAL SPECIFICATIONS ....................18 DISPOSAL ............................20 FDBP 200951-E... -
Page 4: Symbols
Symbols 2. SYMBOLS The product complies with the applicable standards and regulations. Read the Instruction Manual attentively prior to use. Double-insulated. Use eyes protective equipment Use ears protectiove equipment Wear a breathing mask. Subjected to recycling BELT SANDER OPERATING INSTRUCTIONS... -
Page 5: Machine Description And Items Delivered
Machine description and items delivered | General safety instructions 3. MACHINE DESCRIPTION AND ITEMS DELIVERED Machine Description (See fig. 1) Front Handle Lock On Button Rear Handle Dust Extraction Port Drive Belt Housing Cover Brush Access Caps Belt Tracking Adjuster On/Off Trigger Speed Control Dial Front Roller... -
Page 6: Electrical Safety
Grasp hand power tools at the designated isolated grip areas because, during operation, one may come into contact with the cutting or drilling fittings with a hidden conductor or with the power cord. FDBP 200951-E... -
Page 7: Personal Safety
General safety instructions Personal safety When using a power tool, be careful and alert, pay special attention to the activity you are doing. Concentrate on your work. Do not work with power tools if you are tired or if you are under the influence of drugs, alcohol or medication. - Page 8 Avoid coming into contact with this substance and if you do come into contact with it, rinse the affected area under running water. If the chemical substance comes into contact with the eye, immediately seek out medical attention. The chemical substance from the battery can cause serious injury. FDBP 200951-E...
-
Page 9: Special Safety Instructions
General safety instructions| Specific safety instructions Service Do not change parts of the tool, do not perform repairs on your own and do not interfere with the tool’s construction in any way. Leave tool repairs to qualified persons. Each repair or product modification performed without our company’s permission is inadmissible (it can cause injury or harm to the user). - Page 10 Work with electromechanical tool in the vicinity of flammable materials is prohibited. Ignition of the materials by sparks may occur. Use of accessories requiring cooling by liquid is prohibited. Use of water or other coolants may cause injury or death by electric current. FDBP 200951-E...
-
Page 11: Use And Operation
Any other additional requirements must be agreed between the manufacturer and the customer. Use the machine and attachments (note the manufacturer‘s specifications) only for the intended range of applications. Any other use is strictly forbidden. FDBP 200951-E BETL SANDER... - Page 12 Ensure the sander is disconnected from power Place the sander upside down on a workbench or similar solid, flat surface Position the Depth Frame (12) so that it is about half way along the thread of the Depth Adjustment Knob (13) FDBP 200951-E...
-
Page 13: Working With Angle Grinder
Depth Frame (12) To adjust the depth frame, rotate the Depth Adjustment Knob (13) on the rear of the machine It is highly recommended that you practice working with scrap material until the optimum sanding depth is determined FDBP 200951-E BELT SANDER... -
Page 14: Cleaning And Maintenance
Keep your machine clean at all times. Dirt and dust will cause internal parts to wear quickly, and shorten the machine’s service life. Clean the body of your machine with a soft brush, or dry cloth. If available, use clean, dry, compressed air to blow through the ventilation holes FDBP 200951-E... -
Page 15: Operation And Maintenance Hints
Cleaning and maintenance | Operation and maintenance hints Your tool requires no additional lubrication or maintenance. It contains no parts that can be repaired by you. Never use water or chemical cleaners to clean your tool. Wipe the tool using a dry cloth. Keep the engine fan apertures clean. -
Page 16: Declaration Of Conformit
Declaration of conformity 10. DECLARATION OF CONFORMITY Product/Name: BELT SANDER / FIELDMANN Type/Model: Type/Model: FDBP 200951-E ............. 230V / 50Hz / 950W The product complies with the following directives: The Directive of the European Parliament and the Council No. 2014/35/EU... -
Page 17: Technical Specifications
Technical specifications 11. TECHNICAL SPECIFICATIONS Power supply............................230V~ / 50Hz Power input................................. 950W Speed................................120-380 Protection class................................II Power supply cable length..........................1.8 m LpA: (sound pressure level)........................92.3 dB(A) LwA: (sound power level)........................dB (A) 103.3 Vibration level..................... ah.D1 = 2.316 ms , K = 1.5 ms Instructions Manual - language version only. -
Page 18: Troubleshooting
Technical specifications Troubleshooting Suspected malfunctions are often due to causes the user can fix themselves. Therefore check the product using this section .In most cases the problem can be solved quickly . WARNING! Only perform the steps described within these instruction s! All further inspection ,maintenance and repair work must be performed by an... -
Page 19: Disposal
This product fulfils all basic requirements of the EU directives that apply to it. Text, design and technical specifications can change without prior notice and we reserve the right for their change. FDBP 200951-E...