Advertisement
Quick Links
Town Square
Dual Control
Widespread Lavatory Faucet
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED
TOOLS
1
INSTALL SPOUT
Fig. A.
• Insert SHANK (1) and HOSE (2) through center hole.
• Thread LOCKNUT (3) onto SHANK (1) from underside of sink or
mounting surface.
• Align and center SPOUT (4). Tighten LOCKNUT (3).
1A
INSTALL VALVE BODIES
Fig. B.
• Remove LOCKNUT (6) from SIDE VALVE SHANKS (5).
• Insert Hot and Cold SIDE VALVE HOSES (7),
FLEXIBLE SUPPLIES (7a) into mounting holes.
• Thread LOCKNUT (6) onto each SIDE VALVE
SHANK (5) from underside of sink or
mounting surface.
• Align and center SIDE VALVES. Tighten
LOCKNUTS (6).
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
INSTALLATION
INSTRUCTIONS
S
®
Phillips Screwdriver
Flat Blade Screwdriver
Turn off hot and cold water
CAUTION
supplies before begining.
5
6
7 Red Stripe
(HOT)
7455.801
7455.811
7455.814
Channel Locks
Fig. B.
7a
7a
- 1 -
Certified to comply with ANSI A112.18.1M
Adjustable Wrench
Fig. A.
4
SPOUT BASE
1
7 Blue Stripe (COLD)
Wrench
(Supplied)
3
2
M965900 (8/18)
Advertisement
Related Manuals for American Standard Town Square S Series
Summary of Contents for American Standard Town Square S Series
- Page 1 Dual Control 7455.811 Widespread Lavatory Faucet 7455.814 Thank you for selecting American Standard... the benchmark of fine quality for over 140 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1M...
- Page 2 INSTALL POP-UP DRAIN • Apply a bead of putty to underside • Drop FLANGE (1) into LAVATORY of FLANGE (1). DRAIN (2). From below assemble RUBBER GASKET (3), METAL WASHER (4) and LOCK NUT (5). Do not tighten. • Place SEAL (1) with small end facing up into TAILPIECE (2) and tighten against DRAIN BODY (4).
- Page 3 TEST INSTALLED FITTING • With HANDLE (1) in OFF position, turn on WATER SUPPLIES (2) and check all connections for leaks. • Remove AERATOR (3). • Operate HANDLE (1) to flush water lines thoroughly. • Replace AERATOR (3). CHECK DRAIN CONNECTIONS •...
- Page 4 Town Square ® Dual Control Widespread Lavatory Faucet MODEL NUMBERS 7455.801 7455.811 M970461-YYY0A LIFT ROD & ROD 7455.814 M970460 -YYY0A (7455.8X1) HANDLE KIT M970596 -0020A HANDLE KIT WITH RED INDEX (HOT) 7455.811/814 M970597 -0020A HANDLE KIT WITH BLUE INDEX (COLD) 7455.214/217 M923840-0070A M964055-0070A...