Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Panduit Z11C Series
- Page 1 Preconfigured Network Zone System Part Number(s): Z11C-** INSTALLATION INSTRUCTIONS V00028RH © Panduit Corp. 2014 Z11C-** Preconfigured Network Zone System For Technical Support: tact-us http://www.panduit.com/wcs/Satellite?pagename=PG_Wrapper&friendlyurl=/en/support/con Page 1 of 8...
-
Page 2: Table Of Contents
INSTALLATION INSTRUCTIONS V00028RH © Panduit Corp. 2014 TABLE OF CONTENTS Page Overview of Products Page Warnings / Safety Information Page Specs/ Tools Needed Page Wall Mounting Page Reversible Door Page Removable Gland Plate Page Pre-Configured Layout Recommended Installation Instructions for:... -
Page 3: Overview Of Products
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES The practices contained herein are designed as a guide for use by persons having technical skill at their own discretion and risk. Panduit does not guarantee any favorable results or assume any liability in connection with these instructions. Local, State, Federal, and Industry Codes and Regulations, as well as manufacturers requirements, must be consulted before proceeding with any project. -
Page 4: Specs/ Tools Needed
INSTALLATION INSTRUCTIONS V00028RH © Panduit Corp. 2014 Preconfigured Network Zone Z11C-** Specifications Enclosure Rating UL Type 4/12 and IP66 (IEC 60529), NEMA 4X available Wall mount with outside-mount flange Installation Height Width Depth Dimensions 12” 14” 9.7” (305 mm) (356 mm) -
Page 5: Wall Mounting
INSTALLATION INSTRUCTIONS V00028RH © Panduit Corp. 2014 Wall Mounting Enclosure may be mounted on any wall utilizing Unistrut or by drilling directly into any concrete wall. There are two mounting hole locations on the top flange and two locations at the bottom flange. -
Page 6: Reversible Door
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS V00028RH © Panduit Corp. 2014 © Panduit Corp. 2014 Reversible Door The enclosure comes with the door opening to the left. The door may be reversed to open to the right. Step 1: Remove screws and washers from door hinges. -
Page 7: Pre-Configured Layout
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS V00028RH © Panduit Corp. 2014 © Panduit Corp. 2014 Recommended Installation Instructions for Bundled Accessories Preconfigured Network Stratix 5700 Industrial Switch DIN Rail DIN rail mounted Mini-Com adapters (2) Cable management L-rings mounted to the side acces-... -
Page 8: Uplink Entry
INSTALLATION INSTRUCTIONS V00028RH © Panduit Corp. 2014 Uplink Cabling Fiber patch cord slack on the side mounted spool Uplink cable entry Downlink Cabling Slack loop formed around the L-ring cable managers Downlink cable entry For Instructions in Local Languages E-mail: and Technical Support: tp-csdebt@panduit.com...