Opencockpits B737 MCP V3 Installation And Use Manual page 10

Installation and Use Manual for B737 MCP V3.
3.- PMDG 737NGX: This add-on requires a client software like iFly without need FSUIPC.
Currently only there is available a program called OC4BA (Opencockpits for Boeing Airplanes).
This software has differents requirements than the above concerning the configuration of Sioc.
First launch SIOC and will note the DEVICES showing for each module, after sioc.ini file must
strictly follow the specifications requested by the OC4BA, which are (for MCP):
MASTER=0,5,1,xx : for MCP V2.
MASTER=0,15,1,xx : for MCP V3.
For others there are other lines MASTER modules but if we are not connected void erasing
those lines or annulling them putting brackets
[MASTER=1,7,1,yy]
[MASTER=2,7,1,nn]
[MASTER=13,13,1,zz]
If not OC4BA will fail to launch Sioc. Once changes are made, we will launch the simulator with
add-on, launch the OC4BA, we click on the plane going to fly (1) and make another click on the
cockpit of the 737 that appears in the background of the program (2),
in this way will launch the SIOC with the configuration established and we can enjoy our
module.
www.opencockpits.com 10