Fidelis Network CommandPost/K2 Quick Start Manual page 4

4. CommandPost/K2 Networking Environment
The CommandPost/K2 appliances use the Admin network for service and inter-node communication.
CommandPost/K2 appliances offer the IPMI/iLO interface for optional out-of-band management of
the appliance.
Use the tables below to identify the count and type of switch ports necessary to support the number
of appliances for your deployment.
Admin Network
The Admin Network connects CommandPost/K2 to the Fidelis Network sensors, Collectors, and
Sandbox components.
Appliance
CommandPost/K2
iLO / IPMI Network
Optional network for remote/out-of-band server administration.
Appliance
CommandPost/K2
5. Appliance — Logical Network Configuration
Each physical connection must be assigned logical network information. Build a table of the logical
information for each appliance that you can reference during configuration. (See the sample table
below.) Appendix A has a worksheet you can use to build your own Network Configuration table that
you will reference multiple times during setup.
Sample Network Configuration Table
Network Setting
Interface:
Hostname (FQDN)
Static IP Address
Subnet Mask
Gateway
Proxy Server
DNS Servers
NTP Servers
Time Zone
©Fidelis Cybersecurity
Switch Port Type
GbE RJ45 (copper)
Switch Port Type
GbE RJ45 (copper)
Admin/eth0
CommandPost/K2-1.organization.net.
10.1.2.3
255.255.255.0
10.1.2.1
4
QUICK START GUIDE
Fidelis Network® CommandPost/K2
Assignments
255.255.255.0
10.5.6.7
8.8.4.4, 8.8.8.8
0.pool1.ntp.org.
UTC (+0)
www.fidelissecurity.com
Qty.
Qty.
iLO/IMM
10.2.3.4