Alarm System And Shock Sensor - Subaru Monitor Owner's Manual

■ Alarm system and shock sensor

You can activate or deactivate the alarm system and the dealer optional shock sensor. Also, you can select
the monitoring start delay time and the sensitivity level for detection of impact to the vehicle.
Press the button and then select
1
NOTE
• The settings for shock sensor can only be performed on a vehicle equipped with the dealer optional shock sensor.
• It takes around 5 seconds for the sensitivity level to be adjusted. During this time, the security indicator light will flash to indicate the
adjustment is being performed.
• If the sensitivity adjustment has not been performed correctly, the buzzer (beeping sound) will sound four times. If the buzzer continues
to sound frequently, please have the system inspected by a SUBARU dealer.
Displaying Vehicle Information and Programming Vehicle System Functions
.
Select .
Select or set the following items.
ALARM
Set the alarm system ON or OFF.
DELAY
Set the monitoring start delay time (after closure of doors).
SHOCK SENSOR
Use the icon to select operation or non-operation. Select the sensitivity using the
"SENSITIVITY" icon. Sensitivity can be selected from MIN to MAX, in a total of 11
gradations.
35