Parking Light - Subaru A3100BE Owner's Manual

Low beam light bulbs
1. Remove the bulb cover, by turning it
counterclockwise.
2. Disconnect the electrical connector.
3. Remove the retainer spring.
4. Replace the bulb, then set the retainer
spring securely.
5. Reconnect the electrical connector.
6. Install the bulb cover.
High beam light bulbs
B00340
1. Disconnect the electrical connector
from the bulb.
2. Remove the bulb from the headlight
assembly by turning it counterclockwise.
3. Replace the bulb with new one.
4. Reconnect the electrical connector. At
this time, use care not to touch the bulb
surface.
5. To install the bulb to the headlight as-
sembly, turn it clockwise until it clicks.
B00341
Maintenance and service

Parking light

1. Remove the bulb socket from the
headlight assembly by turning it counter-
clockwise.
B00342
2. Pull the bulb out of the socket. Install a
11-41
B00343
B00344
– CONTINUED –