Cruise Control Set Indicator Light - Subaru A3100BE Owner's Manual

7-30
Starting and operating
If you move the cruise control lever while
turning the ignition switch "ON", the cruise
control function is deactivated and the
"CRUISE" indicator light flashes. To reac-
tivate the cruise control function, turn the
ignition switch back to the "ACC" or
"LOCK" position, and then turn it again to
the "ON" position.
Cruise control set indicator
light
The cruise control set indicator light
comes on when the ignition switch is
turned to the "ON" position and goes out
after approximately three seconds.
The light comes on when vehicle speed
has been set.
700323