Advertisement
3M Scotchlok
Power Connectors (Typical of 2)
1. Thread TEC power
wire through
connector.
2. Fold up flap to
lock TEC wire
into connector.
3. Insert power wire
from FLNX into
connector so it
appears in window.
4. Use lineman's
pliers to pinch
connecting bar in
place and connect
wires internally.
5. Close connector
cover to secure
wires.
6. Connect the antenna. Be sure the antenna is
securely connected to the FLX.
For a remote mount antenna, do the following:
a. Locate the liquid tight fitting so that the
antenna extension cable does not incur
excessive pull force. At the desired enclosure
location, punch a 1/2" knockout and use the
locknut to secure the body of the liquid tight
fitting into the knockout.
Siemens Building Technologies, Inc.
TM
TEC
Power Wire
TEC Power
(From Transformer)
FLNX
Power Wire
24 Vac
Power Line
Figure 4. FLNX Communication and Power Wiring.
TEC
(Typical)
24 V-AC
DO 1 DO 2 DO 3 DO 4 DO 5
DO 6 DI 3 DI 2
NO C NO C NO C NO C NO C
NO C AI 3
E
C
H
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
C H
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Channel
Network I.D.
24 Vac 1.2 VA
b. Route the antenna through the body of the
liquid tight fitting (Figure 5). Hand-tighten the
liquid tight fitting nut to secure the antenna in
place.
Make certain the liquid tight fitting nut
tightens on the antenna base, not the
antenna itself, so the antenna can be
articulated.
c. Connect the antenna wire securely to the
FLNX.
Document No. 563-002
Installation Instructions
January 12, 2007
FLN
TRUNK
TX RX +
-
S
BST
RTS
Alternate
Power
Page 3 of 4
Advertisement
