Advertisement
Available languages
Available languages
Installation Instructions
1.) Unpack the contents of
the box being careful to
remove all packaging
material that could be
combustible.
3
2.) Temporarily remove the fire pot holder. Please note that
the fire pot holder should also contain the wick and
wick ring.
3.) Rinse your Fire Fountain thoroughly to remove any
debris left over from manufacturing process
4.) Attach the pump to the supply tubing ensuring that
there are no kinks in the tubing that will reduce water
flow, locate the pump as close to the bottom of the
fountain as possible. Do not be concerned of the
orientation of the pump; the pump can be laid on its
side without damage.
4
5.) Run pump cord through riser pipe. Make sure to cover
riser pipe with riser pipe cover that is provided to
prevent loss of water.
www.aquascapeinc.com |
☎
2
CAN 1-866-766-3426 |
☎
5
6.) Fill the fountain portion of the basin with clean
tap water.
6
7.) Reassemble the fountain
7
US 1-866-877-6637
5
5
Advertisement
