Congratulations! Thank you for purchasing this digital drum set. The drum set has been Developed to act and play like a drum set but with greater ease. Before you use the instrument, we recommend you to read through this manual. Taking care of Your Digital Drum Set Handling and Transport Location...
Panel Description Front panel 1. LCD 11. Pad indication Displays the menu content. Indicates the working pad or tests the pad, or set 2. Power switch the pad parameter. Turns on /off the power supply. 12. KIT 3. MASTER VOLUME Switch to drum kit quickly.
Page 5
Rear panel connection 20 21 22 24 25 18. PHONE 23. IN---MIDI---OUT Headphone output connector. Connect with the connector of external device which has MIDI. 19 -OUT PUT- L/mono R 24. USB L/R channel, connect with the output Connect with PC connector (MIDI in/out connector of audio system or drum via USB) amplifier.
Page 6
Panel Description Front panel 1. LCD 10. Pad indication Indicates the working pad or tests the pad, or set Displays the menu content. the pad parameter. 2. MASTER VOLUME Adjust the volume of phone and line output. 11. KIT Switch to drum kit quickly. 3.
Page 7
Rear panel connection 17 18 17. DC IN 22 -OUT PUT- L/mono R Adaptor connector, 5V DC. L/R channel, connect with the output connector of audio system or drum 18. Power switch amplifier. Turns on /off the power supply. 19. USB 23.
Page 8
LCD initial interfaces 1).CLICK=4/4(default value when on):metronome parameter indication TEMPO=100(default value when on):tempo parameter indication KIT01 POP01(default value when on): drum kit indication SONG01(default value when on): demo song indication DRUM ON(default value when on): mutes the drum sound of demo song. CLICK=4/4 TEMPO=100 KIT01 POP01...
Connect with external devices Connect to audio system or amplifier When connecting with audio system or drum amplifier, use a cable to connect with L/mono R of the audio system and the drum amplifier. Note: Connect with L/mono connector when connecting with mono audio device. Connect with L/mono and R connector when connecting with stereo audio device.
2.Connect the computer via MIDI port MIDI IN: receiver MIDI signal of computer or other devices. MIDI OUT: send pad performance signal to external MIDI devices or computer. Connect with a MIDI keyboard MIDI connector: If you're using an external MIDI keyboard or pads to control the digital drum, make connections as shown.
Basic operating Select a drum kit After powering up, the digital drum will be in kit menu (kit indicator on ). the display should look like the following figure. there are 3 ways to activate the drum kit menu: CLICK=4/4 TEMPO=100 KIT01 POP01 SONG01...
Page 12
Cross stick CYMBAL Rim shot (Hit strongly) HI-HAT The Hi-Hat sound varies depending on the position of the Hi-Hat pedal: Open Hi-Hat: Strike the Hi-Hat pad without pressing the pedal. Closed Hi-Hat: Strike the Hi-Hat pad with the pedal pressed completely down. Pedal Close: Press the pedal completely down without striking the pad.
Performing Use metronome 1. User can use the [CLICK] button to turn on/off metronome. 2. use the direction key to select the click items to reset. CLICK=4/4 TEMPO=100 KIT01 POP01 SONG01 DRUM ON Adjust click 3. When the metronome plays at the click and tempo, such as the LCD displays, the CLICK flashes, user can use the direction key to change click.
Edit and create owner’s drum kit In the drum kit menu, user can change parameter according to the playing style then save it. Press [KIT] to select the drum kit Use the direction key to switch to the desired drum kit to edit. 3.Press [SET UP] to enter drum pad setting, and DRUM PAD SETTING contrast color.
Change MIDI output pitch value 11. Use direction key to select MIDI PITICH 12. Use direction key to change MIDI output pitch value(000---127) (when adjusting parameter, press [SET UP] button to reset all parameters back to default status) Save setting to user drum kit 13.
Adjust pad Trigger 1. Use the direction key to switch to PAD TRIGGER 2. Press [SET UP] to enter pad parameter setting. DRUM PAD SETTING 3. Use direction key to select trigger parameter. 4. Use direction key to change trigger parameter. PAD TRIGGER (Press direction key simultaneously, it goes back...
Adjust pad threshold threshold: the minimum force to trigger a pad signal. Setting a high threshold, the pad needs a strong force to generate a signal. This can avoid accidental response, e.g. other device or pad generate unnecessary signal. Setting a low threshold, the pad needs a weak force to generate a signal. User can adjust threshold based on external condition and performing style.
Retrig Cancel: 01-16 This setting allow you to prevent re-trigger ( Re-trigger Important if you are using acoustic drum triggers. Such triggers can produce altered waveforms, which may also cause inadvertent sounding at Point A in the following figure (Retrigger) This occurs in particular at the decaying edge of the waveform.
Adjust pad effect 1. Use the direction key to switch to EFFECT 2. Press [SET UP] to enter pad effect setting. DRUM PAD SETTING PAD TRIGGER RELOAD FAC SET EFFECT EQ setting 3. Use the direction key to select EQ type. 4.
Reload to default setting 1. Use the direction key to select RELOAD FAC SET 2. press [SET UP] to go back to the default setting. RELOAD SETTING 3. Use the direction key to select saved drum kit. e.g. FOR USER01 FOR USER01 4.
DEMO SONG playing Select DEMO SONG 1. Press [SONG] to switch to DEMO SONG CLICK=4/4 TEMPO=100 menu or use the direction Key to select SONG01 KIT01 POP01 2. Use the direction key to Select the preset DEMO SONG SONG01 DRUM ON 3.
Record your performance You can record pad performances and the Drums as accompaniment. Record quickly 1. Press [RECORD]. Recording LED lights up, CLICK=4/4 TEMPO=100 Strike pad to record or record the drum section of the song. KIT01 POP01 Press [RECORD] again to stop recording. Recording LED lights off.
MIDI setting This device is compatible with various MIDI devices. When it is used as trigger device or audio source, it is compatible with GM standard, and can be used with many sequencer software MIDI connection MIDI IN: inputs MIDI signal when connecting with external MIDI device MIDI OUT:outputs MIDI signal when connecting with external MIDI device USB: standard USB2.0 interface,connect with USB of MIDI device or PC.
Need help?
Do you have a question about the JED700M and is the answer not in the manual?
Questions and answers