Page 2
Congratulations! Thank you for purchasing this digital drum set. The drum set has been Developed to act and play like a drum set but with greater ease. Before you use the instrument, we recommend you to read through this manual. Taking care of Your Digital Drum Set Handling and Transport Location...
Content: Assembly..........1 User drum kit default setting ......connection.........2 Pad parameter setting instruction....16 connect pad and module..... DEMO SONG playing ........Panel description.......3 Select DEMO SONG ........Front pane..........3 ....djust volume of accompaniment& pad Rear panel/top........4 Mute drums of DEMO SONG .......
Drum stand assembly 1.Set up the drum stand. Different model has different configuration 2.Put the long cymbal tube/short cymbal tube/L shape pad rod into the drum stand. long cymbal tube long cymbal tube L shape pad rod short cymbal tube short cymbal tube L shape pad rod 3.Put the pads/cymbal/module to the relative position.
When connecting the pads and audio source box, turn off the power switch please, otherwise it will destroy the drum kit! Connecting the pads and module JED650 configuration: 1.SKD200/210/220/230 configuration: TOM1-3(dual CH), SNARE( dual CH), KICK(mono ), HI-HAT (mono), SKD200/210 configuration:TOM1-3(dual CH),SNARE(...
Panel Description Front panel 10. CANCEL 1. SAVE Cancel the operation or go back to the former menu. Start or stop playing DEMO SONG 11. KIT 2. MASTER VOLUME Switch to drum kit quickly. Adjust the volume of phone and line output. 12.
Rear panel connection 20 21 17. PHONE 22. DC IN Headphone output connector. Adaptor connector, 9V DC. 18. -OUT PUT- L/mono R 23. AUX IN L/R channel, connect with the output External stereo input connector, e.g. connector of audio system or drum amplifier. 24.
Side button 25. TOM4 It connects with TOM4 26. CRASH2 It connects with CRASH2 LCD initial interfaces 1).CLICK=4/4(default value when on):metronome parameter indication TEMPO=100(default value when on):tempo parameter indication KIT01 POP01(default value when on): drum kit indication SONG01(default value when on): demo song indication DRUM ON(default value when on): mutes the drum sound of demo song.
Connect with external devices Connect to audio system or amplifier When connecting with audio system or drum amplifier, use a cable to connect with L/mono R of the audio system and the drum amplifier. Note: Connect with L/mono connector when connecting with mono audio device. Connect with L/mono and R connector when connecting with stereo audio device.
2.Connect the computer via MIDI port MIDI IN: receiver MIDI signal of computer or other devices. MIDI OUT: send pad performance signal to external MIDI devices or computer. Connect with a MIDI keyboard MIDI connector: If you're using an external MIDI keyboard or pads to control the digital drum, make connections as shown.
ON / OFF Basic operating Selecting a drum kit after powering up, the digital drum will be in kit menu (kit indicator on ). the display should look like the following figure. there are 3 ways to activate the drum kit menu: CLICK=4/4 TEMPO=100 KIT01 POP01...
The digital drum pad detects head and rim shots (rim shots Are different from the pad shots). Note: 1.SKD200/210/220/230:SNARE and TOM1- JED650 E-Drumset: TOM4 are dual channels. Both are rim shot. 2.RIDE: it delivers RIDE BELL sound when hit strongly, and RIDE CYMBAL sound when hit Slightly.
CYMBAL PAD+RIM HI-HAT The Hi-Hat sound varies depending on the position of the Hi-Hat pedal: Open Hi-Hat: Strike the Hi-Hat pad without pressing the pedal. Closed Hi-Hat: Strike the Hi-Hat pad with the pedal pressed completely down. Pedal Close: Press the pedal completely down without striking the pad. Half-open Hi-Hat:Strike the Hi-Hat pad with the pedal pressed halfway down Performing Adjusting the sensitivity of a pad...
3.When PAD SENSITIVITY flashes, press [SET UP] DRUM PAD SETTING to enter pad sensitivity setting. 4.Strike the relative pad or press the pad button to PAD SENSITIVITY adjust sensitivity. 5.Use the direction key to select the parameter, RELOAD FAC SET and use the keys to change the parameter.
4. In the tempo item, press [SET UP] button to set click tone parameters. CLICK VOICE OPTION VOICE TYPE=01 VOICE VOL=100 1).VOICE TYPE=01 user can adjust the voice type (01---03) 2).VOICE VOL=127 user can adjust the voice volume (000---127) 3).When adjusting parameters, press [SET UP] button to reset. User can adjust the click tempo.
1.Select pad via pad indication button or hit the pads. VOICE=ESN_04 2.Press [SET UP] again to enter tone parameter setting. VOLUME=080 6. use direction key to select tone. PAN=084 (Note:refer to the tone list for tone) MIDI PITCH=044 Change the pad volume 7.Use direction key to select VOLUME item.
Adjusting pad curve Pad curve is relative to the pad dynamic signal. PAD HIHAT (Default:CURVE2) PAD CURVE=2 THRSHLD=4 CROSSTALK=2 CURVE1 CURVE2 CURVE3 CURVE4 CURVE5 Adjusting the pad threshold threshold: the minimum force to trigger a pad signal. Setting a high threshold, the pad needs a strong force to generate a signal. This can avoid accidental response, e.g.
Adjusting pad effect 1. Use the direction key to switch to EFFECT 2. Press [SET UP] to enter pad effect setting. DRUM PAD SETTING PAD SENSITIVITY RELOAD FAC SET EFFECT EQ setting 3. Use the direction key to select EQ type. 4.
Instruction for pad parameter setting 1. Pad curve The curve is relative to the pad dynamic signal. (default:CURVE2) CURVE 1:very low dynamic response, high volume. If used to trigger the pads,the curve is flat. CURVE2: the standard setting, during playing or when volume changes, it generates maximum natural signal.
Adjusting DEMO SONG accompaniment and drum volume 4. press [SET UP]to enter accompaniment and drum volume setting. ACC VOLUME:adjusting accompaniment volume. ACC VOLUME=090 Use the direction key to adjust DRUM VOLUME=090 DEMO SONG accompaniment volume. DRUM VOLUME:adjusting drum volume. Use the direction key to adjust DEMO SONG drum volume.
Playing back the recorded performance 1. Press [VOICE PLAY].LED flashes once. It plays the recorded performance. 2. Press [VOICE PLAY] again to stop playing. 3. If you are unsatisfied with the recorded performance, press [RECORD] to record once again. (Note: it can record the performance but can not save. This means the recorded performance will cover the former recorded performance) Creating your own drum kit Relative information of drum kit...
In drum kit menu, user can set the parameters, 1.Press [SET UP] to enter drum kit parameter DRUM PAD SETTING setting interface. 2.Select DRUM PAD SETTING to enter drum kit PAD SENSITIVITY parameter setting. RELOAD FAC SET 3. Press [SET UP] again to enter pad parameter setting interface.
Change pad pan of L/R channel 1. Use the direction key to select PAN VOICE=ESN_04 2. Use the direction key to change the pan VOLUME=080 of L/R channel. (GM standard:000---127) PAN=084 MIDI PITCH=046 Change MIDI output pitch 1.Use the direction key to select MIDI PITICH VOICE=ESN_04...
CURVE1 CURVE2 CURVE3 CURVE4 CURVE5 Adjusting pad threshold Threshold: the minimum force to generate a pad signal. A high threshold needs a strong force to generate a signal and this can avoid accidental response, e.g. unnecessary signal from other device or pad. A low threshold needs weak force to generate a pad signal.
Adjusting pad effect 1. Use the direction key to switch to EFFECT 2. press [SET UP] to enter pad effect DRUM PAD SETTING setting interface PAD SENSITIVITY EQ setting RELOAD FAC SET 3. Use the direction key to select EQ type. EFFECT 4.
Connecting with external audio device This device automatically via channel 10 transfers drum signal to other MIDI device, including notes, forces, pedal performance, etc. (Note: Song playback data and metronome notes are not transferred Record your performance with external sequencer 1.Connect with external sequencer or PC via MIDI OUT or USB interface.
Need help?
Do you have a question about the JED650 and is the answer not in the manual?
Questions and answers