Advertisement
A-Minima - Control Panel
The A-Minima control panel contains six operator
buttons: up & down arrows, yes, no, menu and lightmeter keys.
- Press menu (the blue button) to access to the camera main menu
- Press Yes to enter or to valid
- Press No to cancel or to go back
- Use arrows to adjust the desired parameter (note that when there is no
selected parameters in the menu, the top arrow allows you to run the camera
from one frame - test mode -).
- Press lightmeter button to read the theoritical aperture showed on the display.
Camera switch On
Press any button to switch On the camera
Camera switch Off
Choose fonction "Power" in the camera main menu
The display shows "Power Off ?"
Press Yes button
Camera back light display
Choose"Display " function in the camera main menu
Press Yes button
Ajust the requested brightness by pressing Up or Down arrows
( low 1 = Back light Off - low 2 = 5 sec - Std 1 = back light 10 sec -
Std 2 = back light 20 sec - Sect = back light On)
Press Yes to valid
20
Advertisement
