Salvus Torino User Manual page 20

2.3 Changing the user code (by a user, without the master code)
Make sure that the safe door is open when you change the code: enter successively *, user code, ENTER
Step
1. Press *
2. Press ENTER
3. Press 3
4. Press ENTER
5. Enter the current user code, e.g. 111111
6. Press ENTER
7. Enter the new user code, e.g. 222222
8. Press ENTER
9. Repeat the new user code, e.g. 222222
10. Press ENTER
If the new code is not accepted, you hear a triple beep and a red light flashes three times. In that case, start
again at step 1 for changing the user code. After changing the code, it is best to test the new code several times
with the door open.
2.4 Deleting the user code
Step
1. Press *
2. Press ENTER
3. Press 0
4. Press ENTER
5. Enter the master code, e.g. 567891
6. Press ENTER
The user code has been deleted. Only the master code remains valid. If the user code deletion is unsuccessful,
you hear a triple beep and a red light flashes three times. In that case, start again at step 1 for deleting the user
code.
20
Action
Action
Key
*
ENTER
3
ENTER
111111
ENTER
222222
ENTER
222222
ENTER
Key
*
ENTER
0
ENTER
567891
ENTER
Signal
Signal